Product Offering

AAtlas RIV912 Power Tool

The Atlas RIV912 is a Pull-to-Stroke pneumatic/hydraulic installation tool provides Spin/Pull action that is used to install the MaxTite®, Standard, NAS and MS type rivet nuts. The RIV912 tool installs rivet nut, fasteners by pull-to-stroke distance control. This Spin-Pull type tool uses a small air motor to place the rivet nut on the mandrel. The rivet nut is then inserted into the mating hole and the trigger is pulled. The tool will axially pull the mandrel back to a pre-adjusted distance, upsetting the rivet nut. The air motor then engages in reverse to disengage and complete the installation. The unified thread version of the tool weighs 5 pounds, has a maximum axial pulling load of 4,721 pounds at 90 PSI air pressure and has a maximum stroke of 0.256 inches. The metric version weighs 2.3 kilograms, has a maximum axial pulling load of 21kN at 6 BAR and has a maximum stroke of 6.5 mm. The thread size capability of the RIV912 installation tool is as follows:

Go to Data Sheets: