Product Offering

Atlas Riv916 Power Tool

The Atlas RIV916 is a Pull-to-Stroke pneumatic/hydraulic installation tool. The RIV916 tool has a long stroke to install the straight slotted shank and pre-bulbed Plus+Tite® rivet nuts. The Pull-to-Stroke tool uses a small air motor to place the rivet nut on the mandrel. The rivet nut is then inserted into the mating hole and the trigger is pulled. The tool will axially pull the mandrel back to a pre-adjusted distance, upsetting the rivet nut. The air motor then engages in reverse to disengage and complete the installation. A single stage trigger controls the complete installation sequence and an automatic timed reverse spin and stop feature insures maximum installation speed. The unified thread version of the tool weighs 5 pounds, has a maximum axial pulling load of 2,923 pounds at 90 PSI air pressure and has a maximum stroke of 0.630 inches. The metric version weighs 2.3 kilograms, has a maximum axial pulling load of 13kN at 6 BAR and has a maximum stroke of 16 mm. The thread size capability of the RIV916 installation tool is as follows:

Go to Data Sheets: