Atlas RIV942 Power Tool

The Atlas RIV942 is a Pull-to-Pressure or Pull-to-Stroke pneumatic/hydraulic installation tool. The RIV942 tool installs SpinTite® thin wall and MaxTite® Standard, NAS and MS rivet nuts. It can use two different systems of regulation, Pull-to-Pressure or Pull-to-Stroke. The Pull-to-Pressure system is similar to the Spin-Pull tool but with the addition of a pressure transducer that will sense the correct fastener installation and complete the installation cycle. These tools can install rivet nuts across the full grip range quickly and consistently. A single stage trigger controls the complete installation sequence and an automatic timed reverse spin and stop feature insures maximum installation speed. The RIV942 tool also can install the rivet nut by pull to stroke distance control. The Pull-to-Stroke system uses a small air motor to place the rivet nut on the mandrel. The rivet nut is then inserted into the mating hole and the trigger is pulled. The tool will axially pull the mandrel back to a pre-adjusted distance, upsetting the rivet nut. The air motor then engages in reverse to disengage and complete the installation. The unified thread version of the tool weighs 6.8 pounds, has a maximum axial pulling load of 6,969 pounds at 90 PSI air pressure and has a maximum stroke of 0.394 inches. The metric version weighs 3.1 kilograms, has a maximum axial pulling load of 31kN at 6 BAR and has a maximum stroke of 10 mm. The thread size capability of the RIV942 installation tool is as follows:

Go to Data Sheets:

Atlas RIV942 Video