|
Atlas RIV998V Power Tool The Atlas RIV998V is a Pull-to-Stroke pneumatic/hydraulic installation tool. The RIV998V tool uses a Spin/Pull action to install SpinTite® thin wall and MaxTite® Standard, NAS and MS rivet nuts. The RIV998V tool uses a small air motor to place the rivet nut on the mandrel. The rivet nut is then inserted into the mating hole and the trigger is pulled. The tool will axially pull the mandrel back to a pre-adjusted distance, upsetting the rivet nut. The air motor then engages in reverse to disengage and complete the installation. A single stage trigger controls the complete installation sequence and an automatic timed reverse spin and stop feature insures maximum installation speed. A pressure-controlled setting allows the installation of the same insert in to various material thickness without any adjustment of the tool. The unified thread version of the tool weighs 5.3 pounds, has a maximum axial pulling load of 4,271 pounds at 90 PSI air pressure and has a maximum stroke of 0.256 inches. The metric version weighs 2.4 kilograms, has a maximum axial pulling load of 19kN at 6 BAR and has a maximum stroke of 6.5 mm. The thread size capability of the RIV998V installation tool is as follows: Go to Data Sheets:Atlas RIV998V Power Tool Atlas RIV998V Video
|
|